Sanyo Camcorder VCC 6584 User Guide

e_l5ax4_us_7.fm Page 1 Friday, April 23, 2004 2:13 PM  
INFORMATION TO USER  
PRECAUTIONS  
J
J
Safety Guard  
In case of problem  
Protect from high temperatures  
Do not use the unit if smoke or a strange odor comes from the unit,  
or if it seems not to function correctly. Turn off the power  
immediately, and consult your dealer or an Authorized Sanyo  
Service Center.  
Do not install close to stoves, or other heat sources, such as  
spotlights, etc., or where it could be subject to direct sunlight, as this  
could cause deformation, discoloration or other damages.  
Be careful when installing close to the ceiling, in a kitchen or boiler  
room, as the temperature may rise to high levels.  
THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT  
OPERATING AND MAINTENANCE INSTRUCTIONS IN THE  
LITERATURE ACCOMPANYING THIS UNIT.  
INSTRUCTION MANUAL  
(Warranty attached)  
VCC-6584  
WARNING:  
TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT  
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.  
J
Do not open or modify  
COLOR CCD camera  
J
Cleaning  
Do not open the cabinet, as it may be dangerous and cause  
damage to the unit. For repairs, consult your dealer or an  
Authorized Sanyo Service Center.  
 Dirt can be removed from the cabinet by wiping it with a soft cloth.  
To remove stains, wipe with a soft cloth moistened with a soft  
detergent solution and wrung dry, then dry by wiping with a soft  
cloth.  
 Do not use benzine, thinner or other chemical products on the  
cabinet, as this may cause deformation and paint peeling. Before  
using a chemical cloth, make sure to read all accompanying  
instructions. Make sure that no plastic or rubber material comes  
into contact with the cabinet for a long period of time, as this may  
cause damage or paint peeling.  
For the customers in Canada  
This Class B digital apparatus complies with Canadian ICES-003.  
About this manual  
Before installing and using the camera, please read this manual  
carefully. Be sure to keep it handy for later reference.  
Pour la clientèle canadienne  
Cet appareil numerique de la Classe B est conforme a la norme NMB-003  
du Canada.  
J
Do not put objects inside the unit  
Make sure that no metal objects or flammable substance get inside  
the unit. If used with a foreign object inside, it could cause a fire, a  
short-circuit or damage. Be careful to protect the unit from rain, sea  
water, etc. If water or liquid gets inside the unit, disconnect the  
power cord immediately, and consult your dealer or an Authorized  
Sanyo Service Center.  
This installation should be made by a qualified service person and should  
conform to all local codes.  
 Dimensions: mm  
56  
108  
This equipment has been tested and found to comply with the limits for a Class  
B digital device, pursuant to Part 15 of the FCC Rules.  
These limits are designed to provide reasonable protection against harmful  
interference in a residential installation. This equipment generates, uses, and  
can radiate radio frequency energy and, if not installed and used in accordance  
with the instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular  
installation. If this equipment does cause harmful interference to radio or  
television reception, which can be determined by turning the equipment off and  
on, the user is encouraged to try to correct the interference by one or more of  
the following measures:  
1.3  
99  
J
Be careful when handling the unit  
45  
To prevent damage, do not drop the unit or subject it to strong  
shock or vibration.  
11  
J
Install away from electric or magnetic fields  
16  
25.8  
1/4”–20 UNC  
If installed close to a TV, radio transmitter, magnet, electric motor,  
transformer, or audio speakers, the magnetic field they generate  
may cause image distortion.  
28  
 Reorient or relocate the receiving antenna.  
 Increase the separation between the equipment and receiver.  
 Connect the equipment into an outlet on a circuit different from that to which  
the receiver is connected.  
J
Protect from humidity and dust  
To prevent damage, do not install the unit where there is greasy  
smoke or steam, where the humidity may get too high, or where  
there is a lot of dust.  
 Consult the dealer or an experienced radio/TV technician for help.  
This device complies with Part 15 of the FCC Rules. Operation is subject to the  
following two conditions: (1) This device may not cause harmful interference,  
and (2) this device must accept any interference received, including interference  
that may cause undesired operation.  
Changes or modifications not expressly approved by Sanyo may void the user's  
authority to operate this camera.  
Depending on the conditions of use, installation and  
Printed on recycled paper  
environment, please be sure to make the appropriate settings  
and adjustments. If you need help with installation and/or  
settings, please consult your dealer.  
1AC6P1P2784--  
L5AX4/US (0504TR-SY)  
SANYO Electric Co., Ltd.  
Printed in Japan  
NAMES AND FUNCTIONS OF PARTS  
TROUBLESHOOTING  
Before sending the camera out for repair, check the items below.  
If the problem persists after checking these items, consult your  
dealer or an Authorized Sanyo Service Center.  
SPECIFICATIONS  
Scanning system  
: NTSC standard TV system  
LOCK (flange-back lock screw)  
(525 TV lines, 30 frames/s)  
Flange-back adjustment dial  
Interlace  
: PLL 2:1 interlace  
Image device  
: 1/3 inch solid state image device CCD  
: 768 (H) x 494 (V)  
Camera attachment bracket  
Used to attach the camera.  
Number of pixels  
in image area  
J
If no image appears  
Lens mount cap  
 Is the coaxial cable attached securely?  
 Are the power and voltage normal?  
 Has the iris of the lens been adjusted correctly (with the LEVEL  
dial)?  
Sync system  
:
Internal sync/Line lock (only when using an AC 24 V  
adapter)  
Protects internal parts of the camera, such as the CCD, from damage.  
Q
Resolution  
: 520 TV lines horizontally, 350 TV lines vertically  
: 1.0 V(p-p)/75 , composite  
: More than 48 dB (More than 50 dB for AGC OFF)  
Attaching the lens  
Video output level  
Image S/N ratio  
Use a DC type auto-iris lens (sold separately).  
NOTE:  
 Is there adequate illumination?  
Minimum required  
illumination  
(incandescent lighting)  
: GAIN HI: Approx. 0.5 lx (F 1.2 lens)  
GAIN NORM: Approx. 1.0 lx (F 1.2 lens)  
 Do not use a lens if length “L” is more than 5 mm.  
Otherwise, it may damage the camera and prevent  
proper installation.  
 Depending on the type of lens, the shape of the lens plug  
may differ. In this case, consult your dealer or an  
J
If the image is unclear  
Backlight  
compensation  
: OFF/Multi-spot metering (2 modes)/Center-  
weighted metering  
 Is the monitor adjusted correctly?  
 Is the flange-back position correctly set?  
 Is the lens in focus?  
L
Authorized Sanyo Service Center.  
 When attaching a C mount lens, attach the lens to the  
camera after inserting the C mount ring (sold  
separately).  
Iris function  
: Auto-iris/Electronic-iris  
: 4-pin  
Lens iris output  
terminal  
 Is the lens dirty?  
Flange-back  
White balance  
Gain control  
Lens mount  
: 12.5 mm ±0.5 mm  
: Auto/Manual  
: Normal/High  
: CS mount  
Dirt or fingerprints on the lens can adversely affect the image.  
Gently wipe any dirt or fingerprints off the lens with a soft cloth or  
lens cleaning paper and cleaning fluid (commercially available).  
GND, AC24V, DC12V (ground terminal, AC 24 V or DC 12 V input  
terminal)  
1
Remove the lens mount  
cap from the camera.  
VIDEO OUT (video output terminal: BNC connector)  
Connects to the video input terminal on the monitor, digital video recorder  
or time-lapse VCR.  
2
3
Install the auto-iris lens.  
1
Operating  
environment  
: Temperature: -10°C – +50°C (14°F – 122°F)  
Humidity: less than 90%RH (no condensation)  
Connect the lens plug to  
the LENS terminal on  
the side of the camera.  
SERVICE  
The camera is a precision instrument. Handle it carefully and  
always follow the safety precautions. If the camera requires service,  
never try to repair it yourself or open the casing.  
POWER (power indicator)  
Lights when the camera power is on.  
Power supply  
: AC 24 V ±10%, 60 Hz/DC 12 – 15 V ±10%  
Power consumption : 3.6 W (with auto-iris lens)  
Weight : Approx. 280 g (without lens)  
Camera adjustment/setting section  
See “CAMERA ADJUSTMENTS/SETTINGS”.  
LENS (lens iris output terminal)  
Used to connect the lens plug when the auto-iris lens is attached.  
c Brake coil (-) d Brake coil (+)  
e Drive coil (+) f Drive coil (-)  
For servicing, maintenance, or repairs, consult your dealer or an  
Authorized Sanyo Service Center.  
3
Appearance and specifications are subject to change without prior notice or  
obligations.  
2
CS mount type lens  
 

Radio Shack Oven 15 2525 User Guide
Raypak Boiler 2342BE User Guide
Samson Microphone USB Series User Guide
Samsung Camcorder AD68 00400C User Guide
Samsung Computer Monitor 2033SW User Guide
Samsung Flat Panel Television LC650 QSG User Guide
Samsung Projection Television HC R5251W User Guide
Sanyo Car Satellite TV System DP32242 User Guide
Sauder TV Mount 402932 User Guide
Seagate Computer Drive 100665905 User Guide