Instruction Manual
Manuel d'utilisation
Bedienungsanleitung
Gebruiksaanwijzing
Manuale d'Istruzioni
Manual de instrucciones
CE42LE1
LCD Monitor
English
Page
Page
Seite
2~13
GB
Moniteur d'affichage à cristaux liquides
LCD-Display
LCD-Display
Monitor LCD
Monitor de LCD
F Français
14~25
26~37
Deutsch
D
NL
I
Nederlands Bladzijde 38~49
Italiano
Pagine
Página
50~61
62- 74
Español
E
Please read this Instruction book before using your LCD monitor. We wish you many hours of pleasure from your new LCD monitor
Veuillez lire attentivement ce mode d’emploi avant d’utiliser votre moniteur d’affichage à cristaux liquides. Nous espérons que votre
nouveau dispositif d'affichage vous procurera de nombreux instants de bonheur.
Lesen Sie diese Anleitung bitte aufmerksam durch, bevor Sie Ihren LCD- Monitor in Betrieb nehmen. Wir wünschen Ihnen viel Freude
mit Ihrem neuen Gerät.
Lees deze handleiding voordat u uw LCD- monitor gaat gebruiken. We wensen u vele uren van plezier met uw nieuwe beeldscherm.
Leggere attentamente questo manuale d’istruzioni prima di utilizzare il monitorLCD. Vi ringraziamo per aver scelto un monitor LCD
Sanyo che vi consentirà di trascorrere momenti piacevoli e divertenti.
Lea este manual de instrucciones antes de usar su nuevo monitor. Deseamos que disfrute de él muchas horas.
GB
GB
SERVICING & END USER LICENSE
Servicing
Your monitor is fully transistorised and does not contain any user serviceable components.
You must not remove the rear cover of the monitor by yourself. The apparatus is working with high voltages and could damage
objects or even endanger people. Leave all required repair and service jobs to an authorised service technician. He will exclusively
use such spare parts that are complying with the same safety standards as applicable to the original parts. The use of original spare
parts can prevent fire, shock and other hazards.
Unplug the LCD monitor from the wall outlet and refer servicing to qualified service personnel under the following conditions:
■ If the power cord or plug is damaged.
■ If liquid has been spilt in to the LCD monitor.
■ If the LCD monitor has been exposed to rain or water.
■ If the LCD monitor has been dropped or the cabinet has been damaged.
■ If the LCD monitor exhibits a distinct change in performance.
■ If the LCD monitor does not operate normally by following the operating instructions.
Adjust only those controls that are covered in the operating instructions as improper adjustment of other controls may result in damage. This will
often require extensive work by a qualified technician to restore the monitor to normal operation.
End-User License
● incorporate all (or any of) the Software into other programs
developed by (or on behalf of) you and/or used by you;
The product (meaning the equipment or appliance to which this
documentation relates) incorporates Software (the software applica-
● reverse-engineer, decompile or disassemble the Software;
tions, utilities and modules embedded within the Product) which is
owned by Sanyo or its licensors. Before using the product, please
read the End-User License Conditions detailed below. If you do not
agree to the terms and conditions of the End-User License, Please
do not proceed to use the Product- repack the Product unused and
return it to your supplier together with proof of purchase for a full
refund. By using the product, you agree to be bound by the terms
and conditions of the End-User License.
● make the Software (or any part of it) available, or permit its
redistribution, for use with any computer hardware other than
the Product; or rent, lease, gift, loan, sell, distribute or transfer
possession of the whole or any part of the Software.
Termination
This license is effective until terminated. This license will terminate
automatically without notice if you fail to comply with any of its
provisions.
License Grant, Conditions and restrictions
1. Sanyo grants you a non-exclusive, world-wide (subject to export
controls), non-transferable (except as permitted by 2 below),
royalty-free license to use the Software upon and with the Product.
Disclaimer
1. The Software is(to the extent permitted by law) supplied ‘as is’ and
SANYO and its suppliers expressly exclude all warranties, express
or implied, including (but not limited to) warranties of satisfactory
quality, fitness for purpose and non-infringement (save to the
extent that the same are not capable of exclusion at law).
2. You may not transfer any of your license rights in the Software
without the prior written consent of SANYO and if consent is
provided then the Software shall only be transferred in conjunction
with the transfer of the Product AND provided that the transferee
has read and agreed to accept the terms and conditions of this
license.
2. In no circumstances will SANYO be liable for any direct, indirect,
consequential, or incidental damage (including loss of profits,
business interruption, loss of data or the cost of procurement of
substitute goods, technology or services) arising out of the use or
the inability to use the Software (save to the extent that such
liability is not capable of exclusion at law).
3. You must ensure that the copyright, trademark and other protective
notices contained in the Software are maintained and not altered
or removed.
4. The Software provided hereunder is copyrighted and licensed (not
sold). SANYO especially does not transfer title or and ownership
rights in the Software to you. The Software provided hereunder
may contain or be derived from portions of materials provided to
SANYO under license by a third party supplier.
General
1. This End-User License will be governed by laws of England and
the User may only bring claims in the English Courts and SANYO
shall be entitled to bring a claim in the courts of any jurisdiction.
2. The above terms and conditions supersede any prior agreement,
oral or written, between you and SANYO relating to the Software.
5. Except as expressly permitted by statute you may not;
● use the Software in conjunction with any other computer
hardware other than the product;
● copy all or part of the Software;
3
GB
GB
INSTALLATION
Step : 1 Mains Connection
AV2 / DVI
PC-IN
AUDIO IN
DVI-D
L
R
■ Connect the display unit to VGA, BNC and Scart
connector as required.
MONITOR OUT
L
R
AV2
OUT
IN
IN
PR
PR
R
R
OUT
A
V2
/
DVI
PC-IN
AUDIO IN
DVI-D
L
R
MONITOR OUT
L
R
AV2
OUT
IN
IN
R
P
R
R
P
R
AV1
OUT
AV1
SERIAL PORT
V
PC AUDIO-IN
SERIALL POORRT
PC AUDIIO-IN
V
V
AC connection
4.AV3
Composite (CVBS) signal input
1. Connect the IEC power connector to the mains inlet at the rear of
the display unit as shown above.
AV3 OUT is to output the composite video signal from the
VIDEO IN so that you can connect monitors with the use of
loop through function.
2. Connect the power cord of the display unit to a wall outlet.
5. RS232C IN/OUT: Is a input for external commands to control the
monitor (see page 8)
✐ As this product does not have a mains On/Off switch, please
ensure your mains plug is easily accessible.
5. DVI-D (Digital Video Interface)
✐ The display unit is prepared for a mains voltage AC220~240V,
50Hz. To completely switch off the mains, or when the display unit
is not to be used for an extended period of time, it is advisable to
disconnect the power cord from the power outlet.
This monitor has an DVI connector. This input will support a large
range of resolutions as shown on page 11. See page 5 for details of
menu operation. This is located at the back of the monitor next to the
phono sockets.
PC-IN
AV2 / DVI
AUDIO IN
DVI-D
R
L
MONITOR OUT
AC Mains Outlet
L
R
AV2
OUT
IN
6. PC connection
This LCD monitor has a PC connector (PC-IN D-SUB).You can con-
nect a PC to the LCD monitor and use it as a monitor display (see
page 7). Audio can be connected via the 3.5mm PC audio in socket.
7. External Audio Output
To output the audio signal from AUDIO 1,2,3, PC and DVI.
The speaker impedance should be 8 ohms.
✐ Please use the correct mains lead supplied with the set for your
area
3. Warning: To prevent injury, the unit must be securely attached to
the wall in accordance with the installation instructions.
WARNING! High voltages are used in the operation of
this set. Refer service to qualified service personnel.
■ Use of Monitor Audio Output Connections
Step : 2 Connections
The audio monitor out sockets on the rear of the set provide a fixed
level audio output for reproducing sound via your audio equipment.
■ INPUT selection
To switch between AV1, RGB, AV2 (RGB H/V or Y, Pb, Pr) AV3, DVI
or PC mode press the TV/ AV button on your remote control
repeatedly or press and hold the TV/AV button for a few seconds and
selection menu will appear on screen.Use the e or d buttons to
select the correct input.
PC-IN
AV2 / DDVI
AUDIO INN
DVVI-D
R
L
1. AV1
SCART connection
2. RGB
MONITOR OUT
TTL input (5V RGB signals) from SCART terminal
3. Y,Pb,Pr/ RGBHV connection (AV2)
This LCD monitor has a choice of Y, Pb, Pr or RGB H/V connections
You can connect your DVD player to the Y, Pb, Pr terminals instead
of using a scart lead. This can support high definition in analogue
component form. RGB H/V can be used as a PC input via the BNC
terminal.Both options support a large range of resolutions (page 11)
L
R
AV2
OUT
IN
4
GB
GB
REMOTE CONTROL
TV/AV button
To switch from AV1, RGB, AV2, AV3, PC or DVI mode
press repeatedly. Press and hold in a few seconds, an AV selection
Standby
bar appears. Select the mode you require using the
keys
To switch the monitor on and off. Also see page 8
Screen mode selector
To select the screen mode, Natural, Full
Zoom, Title-in or Normal.
Refer to page 9.
Recall
To display the program information.
You can also select colour systems in AV mode as follows
AUTO -> PAL -> SECAM -> NTSC3.58
MENU
To enter and exit sub menus.
Up and down
To select the next item
Level up/down
To adjust the sound volume level, or
enter sb menus
Sound mute
Picture mode selection
To mute the sound from the speakers.
The sound changes as follows;
Normal volume -> Mute
Press the
button repeatedly to select the following
picture modes.
Personal - Personal preference mode.
Dynamic - Suitable for brightly lit rooms.
Standard - Normal viewing mode.
Eco - Suitable for dimly lit rooms and gives a
cinema - like effect.
Bass expander
To get an emphasised bass sound ON or OFF.
Surround mode selector
To select the surround mode, OFF, MID, MAX
JXPLA
Remote control battery installation
Install two "AA" 1.5 volt batteries so that the "+" and "-" marks on the
batteries match the "+" and "-" marks inside the unit into the remote
control handset.
5
GB
GB
INSTALLATION
Controls and Menus
Menu Operation
Brightness
Contrast
Color
Sharpness
Preset
Personal / Dynamic / Standard / Eco
Noise Reduction Min/ Mid / Max / Auto / OFF
Dyn. Skin Tone
Text Brightness
ON / OFF
Min/ Mid / Max
Sound
Volume
Balance
Bass
Treble
Preset
Surround
Personal /Talk/ Music/ Normal
Mid / Max / OFF
1
OSD Language
Timer
2
Off Timer OFF/ 5-120 mins
Greek/ East/ West/ Cyrillic
RGB, H/V / Y Pb Pr
Text Language
1. The LCD display has a Standby light to show there is power.
AV2 setting
Switching into/from standby mode
During menu operation the bottom of the on screen display will show
which controls can be used.
Press the MENU button to enter the main menu.
The Standby mode is used for switching the LCD monitor off for
short periods of time. In standby mode the monitor is switched
off but is still receiving mains power.
A sub menu is selected using the e or d button and pressing the
8 button when the required sub menu is highlighted.
When you have finished you can press the MENU button to exit,
then the MENU button again to exit the main menu.
● To turn the monitor into standby mode, press the 4 button.
The blue power indicator illuminates more brightly.
● To turn the monitor ON from standby mode, press any of the
following buttons: 4
5, 6or 0-9 buttons.
,
Main Menu
Picture
Sound
Setting
If you find the power indicator flashing, disconnect
power cord from the power outlet and contact our
Service desk.
MENU
: Select
: Adjust
: Exit
This warning is a sign to let you know that the power
protection function of this TV set is now operating.
Picture menu
2. Control buttons (bottom edge of cabinet)
Picture
Menu/F button: rotate between volume, Brightness, contrast,
colour, sharpness and OSD language.
Brightness
Contrast
Color
Sharpness
Preset
Personal / Dynamic / Standard / ECO
Mid / Max / Auto / Min/ OFF
ON / OFF
Noise Reduction
Dyn. skin tone
Text Brightness
Min / Mid / Max
MENU
: Select
: Adjust
: Back
Input/ OK button: switch between TV, AV1, RGB, AV2, AV3, DVI
and PC mode.
1. Press the MENU button. Select Picture using the e or d button.
Press the 8 button to enter.
e d buttons: provide up and down adjustments
Set the picture settings for your “personal” preference.
4 button: To switch from display to standby mode (to switch off
completely disconnect the monitor from the power supply)
Many of your monitors functions are controlled through the menu
function.
2. Use the e or d button to select eg. Brightness and the 7 or 8
button to adjust levels.
3. Preset : You can select either your “Personal” settings, or
Dynamic, Standard or Eco settings.
4. Noise Reduction: May be used to reduce any local picture ‘noise’
(granular appearance) being experienced by Using 7 or 8 to select
between Mid / Max / Auto / OFF /Min.
5. Dynamic skin tone: May be used to enhance skin tone by Using
7 or 8 to select between On / Off.
Tint : is only available if NTSC equipment is connected.
6. Text Brightness: May be adjusted by Using 7 or 8 button to
select between Min / Mid / Max.
Press the MENU to return to Main Menu. These settings
automatically store when you exit the menu.
Press the MENU button to exit menu.
✐ Your personal settings are automatically saved when you exit the
menu.
6
GB
GB
MENU OPERATION
PC menu settings
Sound menu
Connect your PC to either PC-IN or RGBHV on the rear of the set.
Once connected select PC mode or AV2 (RGBHV, see page 4 for
AV2 input settings) via the v button on your remote control. The
set will become a monitor for the PC.
Press the MENU button and select Sound using the eor d
buttons, press the 8 button to enter.
Sound
By pressing the MENU button on the remote control a menu window
will appear on screen, this allows the settings to be adjusted.
Volume
Balance
Bass
Main Menu
Treble
Preset
Personal / Talk / Music / Normal
OFF / Mid / Max
Picture
Sound
Setting
Surround
MENU
: Select
: Adjust
: Back
MENU
: Select
: Adjust
: Exit
Select and adjust to obtain the best sound settings for your
environment using the e, dand 7 8buttons.
Press the MENU to return to Main Menu. These settings
automatically store when you exit the menu.Press the MENU button
to exit menu.
To adjust the Picture settings select picture using the e or d buttons
on the remote then the 8 button to enter the following picture
settings menu.
Press the 7 or 8 buttons to adjusted the Picture brightness and the
same to adjust the contrast of the picture. Press the 8 button to
enter sub menus
Setting menu
Setting
OSD Language
Timer
English
Picture
Brightness
Contrast
Text Language
Greek/ East/ West/ Cyrillic
Y,Pb,Pr/RGB, H/V
Position
AV2 setting
Video Adjust
Auto Adjust
Resolution
1024 X 768
@60Hz
White Tone R
White Tone G
White Tone B
MENU
: Select
: Adjust
: Exit
Native Resolution
XGA / WXGA 1366 x 768
MENU
: Select
: Adjust
: Back
■ OSD Language
Use the 7 or 8 buttons to select the prefered OSD language
(French, German, Italian, Spanish, Dutch). Press the MENU but-
ton to exit
Picture position changes the picture horizontally or vertically, this is
done by using the 7 or 8 buttons on the remote control.
Video adjust changes the Phase and the clock of the screen. If the
picture is blurred or grainy this function will adjust it to a clearer
picture by using the 7 or 8 buttons on the remote control.
Auto Adjust will automatically adjust the picture by using the 8
button. This will change all the above settings automatically .Auto
■ AV2 setting
In setting menu, to select AV2 press the d button and set to Y,Pb,Pr
or RGB, H/V depending on your external equipment.
adjust can also be achieved by pressing the
/recall
1. Press the MENU button. Select Setting using the e or d button
press the 8 button to enter.
button on the remote control without having to select the menu
Resolution displays the current resolution of the picture. This is for
information only and cannot be adjusted.
2. Select AV2 setting using the e or d button.
3. Press the 7 or 8 button to select either Y,Pb,Pr or RGB H/V.
4. Press the MENU button to exit, this automatically stores your
changes.
White tone: Using the 7 or 8 buttons it is possible to adjust the
colour tone of the picture using the White tone Red(R) / Green (G)/
Blue(B). This will adjust the picture to show more or less of the
chosen colour. For example if red is selected you can adjust the pro
portion of red in the picture to increase or decrease using the 7 or 8
buttons
5. Press the MENU button to exit.
■ Off-timer setting
The Off timer will switch the monitor into the standby mode when the
selected time has elapsed.
Native Resolution is used when the PC can output WXGA
1366 x 768. The setting on your Monitor set can be changed
to receive XGA/WXGA signal using the 7 or 8 buttons . Once the
native resolution has been selected, save the settings by switching
the monitor off then on using the standby button.
1. Press the MENU button. Select Setting using the e or d button
press the 8 button to enter.
2. Select Timer using the e or d button, press 8 buttons to enter.
For Sound settings refere to previous menu
Timer
Setting: select the menu button on your remote and using the e or
d buttons to select Settings. The 8 button will enter the settings
menu.
TIMER
5 ~ 120
Setting
OSD Language
Timer
English
MENU
: Select
: Adjust
: Exit
AV2 setting
Power save
Y,Pb,Pr/RGB, H/V
ON/ OFF
3. Press the 7 or 8 button to change time.
MENU
: Select
: Adjust
: Exit
The time changes in 5 minute steps.The maximum time is 120 min-
utes.
Timer and AV2 settings are the same as in all other input modes
(pg 7)
If you have set the off timer, a display appears in the corner of the
screen when the recall button is pressed.
✐ If the monitor is switched off by the standby button 4 on the
remote control or by the standby switch 4 on the bottom of the
LCD monitor the timer settings will be cancelled.
Power save if turned ON will switch the monitor into Powersave
mode after 1 minute if no signal is detected, the LED light will turn a
brighter blue to indicate stand by. The monitor will automatically turn
back on when a signal has been detected (PC input / RGBHV).
Use 7 or 8 buttons to select power save ON or OFF.
7
GB
GB
PC OPERATION / INSTALLATION MENU
RS232C settings
This monitor can be controlled via the RS232C connector using a
suitable computer/ control commands
Installation Menu
This LCD monitor allows you to set up the following:-
■ Programme position at Start up
SETTING PROCEDURE
Serial Interface Specification
Transfer Specification
1. Transmission Speed: initial setting value is 19200
2. Transmission speed can be changed via Installation menu (see
below)
1. Press and hold the green button on the Remote control
handset for 5 seconds.
2. Use the 5or 6button to highlight each option, use the 1 or
2
to switch between each option.
ITEM
SPECIFICATION
Synchronous system
Transmission Speed
Data Length
Parity
Stop Bit
Flow Control
Asynchronous
9600 / 19200
8 bit
None
1
Installation
/ AV1-AV3 /RGB/ DVI/ PC
OFF
ON Program
Max Volume
OSD
ON/ OFF
ON/ OFF
ON/ OFF
Winter mode
RC Inhibition
Child Lock
Address
ON/ OFF
007
None
Baud Rate
19200
MENU
: Select
: Adjust
: Exit
Connection
The Designated RS-232C serial cable must be used for a
■ On Program
Select ON program using the 6button, select the start up position
PC
TV CONTROL
PORT
using the 1 or 2 buttons.
COM 1
(Off / AV1 / RGB/ AV2/ AV3/ DVI/ PC)
Press the MENU button to exit from the menu.
N.C.
CD
1
2
3
4
5
6
7
8
9
1
RXD
TXD
DTR
SG
DSR
RTS
CTS
RING
2
3
4
5
6
7
8
9
RXD
TXD
N.C
SG
N.C
RTS
CTS
■ Max Volume
Select Max volume using the 6button, use the 1 or 2
buttons to set the maximum volume required.
■ OSD (On screen display)
Select OSD using the 6button, select ON / OFF using the 1 or
2 buttons.Selecting OFF will inhibit the OSD. To re-instate OSD,
press and hold the green button on the remote control and select
OSD ON.
N.C.
(D-Sub 9 Pin)
(D-Sub 9 Pin)
■ Winter mode
This Function can be activated when the LCD monitor is used during
cold temperature conditions, approximately 38˚F/ 4˚C or below to
maintain picture performance.
Using the e or d button select winter mode once highlighted you
can select ON or OFF by pressing the 1 or 2 button.
IMPORTANT: The AC cord should not be disconnected during the
operation of Winter mode function.
When in winter mode, power consumption is higher than normal
standby consumption. This is entirely due to the operation of heating
circuitry. We strongly recommend to turn off Winter mode when the
ambient temperature is above 38F/4C.
connection to a computer and LCD monitor
The TV command is defined by one command/ one line that starts
with “C” and ends with carriage return (0x0D)
There are two types of commands:
Functional Execution Command e.g Co5[CR] (table on page 63)
Status Read Commands e.g “CR0 [CR] (see table on page 63)
Setting the monitor address in RS232 mode
To Access Installation mode press the green button on the remote
■ RC Inhibition
Installation
You can prevent unwanted remote control operation by selecting RC
Inhibition. When selected an inhibit symbol will appear on screen
when a button is pressed on the remote control.
Select using the e or d button. Press the 1 or 2 button to
select On or OFF.
/ AV1-AV3 /RGB/ DVI/ PC
OFF
ON Program
Max Volume
OSD
ON/ OFF
ON/ OFF
ON/ OFF
Winter mode
RC Inhibition
Press and hold the green button to return to menu to select RC
Inhibition
Child Lock
Address
ON/ OFF
007
Baud Rate
19200
■ Child lock
MENU
: Select
: Adjust
: Exit
You can prevent unwanted operation of the LCD monitor via the
buttons on the bottom edge of the monitor.
Select using the e or d button. Press the 8 button to select On or
OFF.
control and hold for 5 seconds. A new screen will appear.
Each monitor can have a specific Address for example 007, which
enables the monitor to be controlled individually and will not affect
other monitors connected to a controlling PC
Address format command
The addressing format command is used for operating multiple
monitor sets from a single PC via the RS232C command line. If you
set your monitor address to ‘000’, it will never respond to any
addressing command from the PC.
If the address from the PC is ‘FFF’, all monitor sets will execute the
command.
The Address format command is defined by one command, one line
which starts with ‘A’ and ends with carriage return.(0 x0D)
The Monitor starts to decode when it receives a carriage return
(0x0D)
An address is added at the top of a control command
Example:
Functional execution command:
“A001C05” [CR] means address is 001 and the control command is
C05
Status read command
“A001CR0”[CR] means address is 001 and command is CR0
The monitor can set its own address in the Installation option menu
(above) The address range is 000 - 999, the default address will be
000
The baud rate indicates the unit for transfer speed of data
from the PC to the monitor sets
8
GB
GB
OPERATION
Selecting of picture size
■ Full
■ Screen options
Today there are various transmission formats with different size
ratios, eg. 4:3 , 16:9 and video formats such as letterbox.
4:3
16:9
Letterbox Video
✐ When in High Resolution (720p / 1080i) YPbPr or DVI, the picture
will remain fixed in 16:9 format ‘Full size’ and may not be changed.
The whole screen
is filled stretching
the width.
The whole screen
is filled with the
corrrect picture
ratio.
The black bars top
and bottom are
present and the
height is
■ Natural
4:3
16:9
Letterbox Video
compressed.
■ Normal
Stretches the
The picture fills the The black bars top
picture horizontally
to fill the screen.
The picture is more
stretched at the
edges.
screen and is
proportionally
correct.
and bottom remain
and the height is
compressed to fit
the picture area.
4:3
16:9
Letterbox Video
■ Zoom
The correct ratio is
maintained with
black bars on the
left and right.
Black bars left and Black bars left,
right, picture height right, top and
is stretched.
bottom.
4:3
16:9
Letterbox Video
The correct picture
width is maintained
but the top and
bottom are
Zooms in slightly
cropping the top
and bottom.
The black bars top
and bottom are
smaller and the
picture height is
compressed slightly.
cropped.
■ Title - In
4:3
16:9
Letterbox Video
TITLES ON SCREEN
TITLES ON SCREEN
TITLES ON SCREEN
As Zoom (16:9),
but bottom is
compressed even
more to allow
subtitles to be
seen.
As Zoom (16:9),
but bottom is
compressed even
more to allow
subtitles to be
seen.
As Zoom (16:9),
but bottom is
compressed even
more to allow
subtitles to be
seen.
9
GB
GB
SPECIFICATIONS / HELPFUL HINTS
Specification
Common specification
Power source
Colour system
220~240V 50Hz
PAL (NTSC3.58),SECAM
AV terminal
AV1: Scart CENELEC Standard
Input: Composite video, RGB (5V RGB with 5V sync to
pin 14) and audio-L/R
Output: TV-output with composite video and audio-L/R
AV2: BNC
Input: RGB, H and V / Y, Pb, Pr and audio L/R
Output: RGB, H and V / Y, Pb, Pr
AV3: BNC
Input: Composite video
Output : Composite video
Audio Monitor.Out: CINCH L/R
Audio Speaker out: 2 x 6W
DVI
PC
Input :
Input:
DVI-D GROUP Standard
Mini D-SUB 15 PIN and
Audio 3.5mm Jack
Serial port: RS232C: INput/Output
Contrast Ratio
1500:1
Screen(inches/ cm)
(viewing measured
diagonally)
42” / 107 cm
Display Resolution
Viewing angles
1366 X 768 (WXGA)
H:178°, V:178°
Dimensions (WxHxDmm) 1032X625X126.5 (without stand)
1032 x 683 x 340 (with stand)
Weight (kg)
22.5 (without stand)
23.5 (Without stand)
Helpful hints
■ NO PICTURE, NO SOUND
● Check if monitor is plugged in.
● Check monitor is not in standby mode
■ POOR PICTURE, SOUND OK
● Adjust BRIGHTNESS/ CONTRAST LEVELS (too low).
■ NO COLOUR, PICTURE OK
● Adjust COLOUR control.
● Check lead connections
● Does the signal input have colour
■ REMOTE CONTROL DOES NOT WORK
● Check batteries are inserted correctly
● Check condition of batteries
● Checkto see if remote control inhibit is set OFF/ON
■ PICTURE OK, NO SOUND
● Check external speakers are connected correctly
● Check lead connections to external equipment
● Volume turned down or mute selected
10
GB
GB
PC/DVI-D / COMPONENT SIGNAL SUPPORT TIMING LIST
PC signal support timing
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Resolution
Remark
720_400
640_480
31.47
31.50
37.50
37.86
37.86
35.00
34.97
35.16
37.90
46.90
32.70
34.50
37.90
38.00
38.60
49.00
48.40
56.50
60.000
44.00
46.90
47.00
48.50
58.03
60.31
61.00
60.24
60.00
79.976
62.50
63.370
63.34
63.74
63.79
63.90
71.69
76.97
81.13
64.20
61.20
61.85
71.40
68.68
75.00
80.00
75.00
70.09
60.00
75.00
72.81
74.38
67.00
66.60
56.25
60.32
75.00
51.09
55.38
61.03
60.51
60.31
74.00
60.00
70.00
75.00
54.58
58.20
58.30
60.02
72.00
74.92
75.70
75.08
60.00
75.025
58.60
60.01
59.98
60.01
60.18
60.00
67.19
72.00
76.107
70.40
65.20
66.00
75.60
75.06
75.08
75.00
60.00
DOS(VGA )
DOS(VGA VESA 60Hz)
640_480
VGA VESA 75Hz
640_480
VGA VESA 70Hz
640_480
VGA
640_480
Mac.
640_480
Mac LC 13"
800_600
SVGA VESA 56Hz
800_600
SVGA VESA 60Hz
800_600
SVGA VESA 75Hz
800_600
SVGA
800_600
SVGA
800_600
SVGA
800_600
SVGA
800_600
SVGA
832_624
Mac.
1024_768
1024_768
1024_768
1024_768
1024_768
1024_768
1024_768
1024_768
1024_768
1024_768
1024_768
1280_960
1280_1024
1280_1024
1280_1024
1280_1024
1280_1024
1280_1024
1280_1024
1280_1024
1280_1024
1280_1024
1152_864
1152_900
1152_900
1152_900
1152_870
1280_960
1280_1024
1600_1200
XGA VESA 60Hz
XGA VESA 70Hz
XGA VESA 75Hz
XGA
XGA
XGA
XGA
XGA
XGA
XGA
MAC_Normal 19"
SXGA VESA 60Hz
SXGA VESA 75Hz
SXGA
SXGA
SXGA
SXGA
SXGA
SXGA
SXGA
SXGA
SXGA
SXGA
SXGA
SXGA
SXGA
MAC_Normal 21"
Mac.
Mac_.
UXGA VESA 60Hz
Component signal suppo rt timing
Horizontal
Frequency
(kHz)
31.43
37.86
37.5
34.97
35
35.16
37.88
46.875
49.72
48.36
60.23
56.47
60.24
68.68
63.98
31.7
31.25
37.5
45
48.36
47.7
28.125
33.75
Vertical
Frequency
(Hz)
Resolution
Horizontal
frequency (KHz)
15.735
Vertical frequency
Remark
Resolution
Remark
(Hz)
60i
50i
60p
50p
60p
50p
60i
720x480
720x576
SDTV 4 80i
SDTV 5 76i
SDTV 4 80p
sDTV 5 76p
HDTV 7 20p
HDTV 7 20p
HDTV 1 080i
HDTV 1 080i
640_480
640_480
640_480
640_480
640_480
800_600
800_600
800_600
832_624
1024_768
1024_768
1024_768
1024_768
1152_870
1280_1024
720_480
768_575
1280_720
1280_720
1366_768
1360_768
1920_1080
1920_1080
59.88
VGA VESA 60Hz
VGA VESA 72Hz
VGA VESA 75Hz
MAC LC 13"
15.625
72.81
75
720x480
31.25
720x576
31.25
66.6
66.67
56.25
60.32
75
1280x720
1280x720
1920x1080
1920x1080
45.00
37.50
33.75
28.13
MAC_ NORMAL 13"
SVGA VESA 56Hz
SVGA VESA 60Hz
SVGA VESA 75Hz
MAC_ NORMAL 16"
XGA VESA 60Hz
XGA VESA 75Hz
XGA VESA 70Hz
MAC_ NORMAL 19"
MAC_ NORMAL 21"
SXGA VESA 60Hz
480p
50i
74.55
60
75.03
70.07
75.08
75.06
60.02
59.94
50
50
60
60
60
575p
720p-50Hz
720p-60Hz
WXGA
WXGA
1080i-50Hz
1080i-60Hz
50
60
Depending on the condition of signals and the type and length of cables,
these signals may not be properly viewed.
11
RS-232C COMMAND TABLES
63
|